SHARP VH3 Manual mill
Vertical & Horizontal MillsThis mill is in really clean condition but has some feed problems. It features a 12 x 51 in. table with 14.8 x 37.4 in. travel. The vertical head is powered by a 5 hp, NST#40 geared head spindle while the horizontal head has a 7.5 hp, NST #50 geared head spindle. The mill has hardened and ground box ways and a built-in gear box that delivers feeds and rapids for the table, saddle, and knee. There is a joystick control for tapping (vertical) and a lever control for boring operation to move the quill up and down (vertical). The mill also has an electro-magnetic brake (vertical) and a backlash eliminator for climb milling.
12 x 51 in. table, 14.8 x 37.4 in. travel
5 hp, NST#40 geared head spindle for vertical head.
7.5 hp, NST #50 geared head spindle for horizontal head.
Hardened and ground box ways.
Built-in gear box that deliver feeds and rapids for the table, saddle and knee.
Joystick control for tapping. (vertical )
Lever control for boring operation to move quill up and down. (vertical )
Electro-magnetic brake. (vertical)
Backlash Eliminator for climb milling.
Table Size-W | 12" | 304.8 mm |
Table Size-L | 51.2" | 1,300.5 mm |
Specifications:
Table Width: 12" 304.8 mm
Table Length: 51.2" 1,300.5 mm