Good condition gage. Ready to use. 2 AVAILABLE. To the best of our knowledge all details listed below are deemed correct. It is the buyers responsibility to confirm ALL details prior to purchase.

Great press works good and is under power and ready to be loaded and shipped. CAPACITY 6 TONS STROKE 12″ MAX DAYLIGHT TO BED 16″ BED AREA 18″ X 11.5″ (RL X FB) RAM AREA 2″ OD THROAT DEPTH 7.5″ CYLI...

Army mobile machine shop! This trailer is FULL of stuff. Welder, lathe, hone, lots of assortments of socket and wrench sets, tap and dye sets, snap on sets, milwaukee power tools, dewalt power tool...

Was in production when taken off line. Works great! To the best of our knowledge all details listed below are deemed correct. It is the buyers responsibility to confirm ALL details prior to purchase.

Low Hours. Contact us for price. To the best of our knowledge all details listed below are deemed correct. It is the buyers responsibility to confirm ALL details prior to purchase. Financing Avail...

In good working order. No longer needed as it was replaced by a larger press. To the best of our knowledge all details listed below are deemed correct. It is the buyers responsibility to confirm AL...

9inx 12-3/8in Mitering Horizontal Bandsaw w. Swivel Mast | BS-315G FEATURES: Swivel mast with degree scale. Centralized control panel. Adjustable hydraulic down feed(just dial your feed rate). Hyd...

Bridgeport VMC 3020 SPECIFICATIONS: Table Size.........................................................36" x 18" Table Load...............................................2,000 Lbs. (909 kg) Table T...

This grinder is powered up and ready to go! MODEL ..................... NO. 2 MAGNETIC CHUCK SIZE ....... 6-1/2" X 18" MANUAL CHUCK .............. YES TABEL TRAVEL FEED ......... 19, 31 FPM TABLE ...

Great forklift! 15,500lbs lift capacity. Had transmission and mast work 5 years ago and new re-maned engine 2 years ago.

Good machine, needs a new filtration system. Selling as is. Rotary table is included. To the best of our knowledge all details listed below are deemed correct. It is the buyers responsibility to c...

Good machine, needs a new filtration system,. Selling as is. Rotary table is included. To the best of our knowledge all details listed below are deemed correct. It is the buyers responsibility to ...

Runs 1/2" bar well anything smaller and it has some play after making a few parts. The machine is currently in production but will be taken out in 2 weeks. Comes with a IEMCA bar feeder as well! ...

Excellent condition Engine Lathe. The cross-slide on this machine has just been rebuilt! Under power for inspection. This machine has been represented authentically, and specifications/dimensions...

Great machine-everything works. Ready to be shipped! Was used to load a press break in production. YEAR 2002 CODE 18U5812 MAX ADMITTED LOAD 165 lbs ARM LENGTH 117 inch WEIGHT 3747 lbs To the best ...

To the best of our knowledge all details listed below are deemed correct. It is the buyers responsibility to confirm ALL details prior to purchase.

12' 6" bed. 19" wide. 15" under the cylinder. Air hydraulic pump with foot lever. To the best of our knowledge all details listed below are deemed correct. It is the buyers responsibility to confir...

14” parts guaranteed. Possible up to 18” Bed is 24 “ wide. Can do up to 1. 1/4” holes 48” of travel in the drill it’s self 3000 lbs. To the best of our knowledge all details listed below are de...

Great condition, was replaced by a new machine and was making good parts the day it was taken out of service. Reported to be holding 2 tenths. Low hours on this beautiful machine. Only 11500 cuttin...

To the best of our knowledge all details listed below are deemed correct. It is the buyers responsibility to confirm ALL details prior to purchase.

41"x 23"x 21' blast box. Has dust collector. Gloves and everything are in good working order and condition. It is now stored inside. To the best of our knowledge all details listed below are deemed...

To the best of our knowledge all details listed below are deemed correct. It is the buyers responsibility to confirm ALL details prior to purchase.

Fanuc Robodrill 5X a-D21MiB5 Fanuc Robot Cell CNC Vertical Mill low Hours 5 Axis. We are selling our Fanuc Robodrill. This setup has worked flawlessly. It is a low hour setup. The Door, both vises...

Machine works as expected. Currently under power. To the best of our knowledge all details listed below are deemed correct. It is the buyers responsibility to confirm ALL details prior to purchase.

Specifications: Max. Pitch Diameter: Ext.3" Int.2" Max. Face Width: 3/4 inch Approximate Dimensions: 3' x 3' x 5'H To the best of our knowledge all details listed below are deemed correct. It i...

WORK SPACE W x D x H - 24" x 36" x 24" KW - 5 VOLUME CU. FT. - 12 CFM - 400 MOTOR H. P. - 1/3 INSULATION THICKNESS - 6" To the best of our knowledge all details listed below are deemed correct. I...

GENERAL SPECIFICATIONS : spindle hours 15 242 X-Axis Travel: 120" Tool Magazine Capacity: 30 ATC Y-Axis Travel: 40" Control: Haas CNC Z-Axis Travel: 30" Chip Removal: Chip Auger Spindle Sp...

Type: Vertical Machining Centers Manufacturer: HAAS Model: VF-2SS Year: 2011 Stock #: 13289 Used - Good Location: Ontario, Canada 2011 Haas VF-2SS Vertical CNC Machining Center, Wireless Intuitive ...

Super clean machine currently under power and ready to go! Upgraded 10,000 rmp spindle Table: 18" x 48" Controller: Haas Tool Turret: 40 Spindle: Cat 40 X Axis Travel: 40" Y Axis Travel: 20" Z Ax...