Model VF-3SS Year: 2007 230 V 3 Phase spindle hours 18492 Doesn't come with tooling

Type: Vertical Machining Centers Manufacturer: HAAS Model: VF-2SS Year: 2011 Stock #: 13289 Used - Good Location: Ontario, Canada 2011 Haas VF-2SS Vertical CNC Machining Center, Wireless Intuitive ...

Great forklift! 15,500lbs lift capacity. Had transmission and mast work 5 years ago and new re-maned engine 2 years ago.

Great machine currently under power and ready to go. 34” Swing Over Bedways 24” Swing Over Cross Slide 3” Spindle Thru Hole Hardways Taper Turning Attachment Inch Threading Spindle Speeds from 6 t...

Great machine! The machine has a cool carriage tilt. With this attached it can lift 25,000, but without its 33,000 capable. It has a 12-valve Cummins in it and starts and runs well. 9' forks. The m...

Great handy little machine! It's ready to go. Machine specifications: Maximum Width of Cut: 36” Maximum Length of Cut: 28” Maximum Thickness: .063” Accessories: Equipped with a 28” fence along the ...

The machine is a ZT 2500Y Main and sub spindles, turret 1 has X, Y and Z with milling and turret 2 has X and Z with milling. All alignments are good. Parts catcher/work conveyor work fine. Has chip...

9inx 12-3/8in Mitering Horizontal Bandsaw w. Swivel Mast | BS-315G FEATURES: Swivel mast with degree scale. Centralized control panel. Adjustable hydraulic down feed(just dial your feed rate). Hyd...

This is a great machine! An option would be to retrofit it with a Fanuc 15i Series Control which would up the price. To the best of our knowledge all details listed below are deemed correct. It ...

LOCATION: Ontario Canada DESCRIPTION: 2004 Mazak Variaxis 500-5X 5-Axis Vertical CNC Machining Center, TSC, Dual Pallet Changer, 60 ATC, Renishaw Parts Probe, 12000 RPM Spindle, Chip Conveyor To...

To the best of our knowledge all details listed below are deemed correct. It is the buyers responsibility to confirm ALL details prior to purchase. Financing Available

This is a great machine! Under power and in super nice condition. To the best of our knowledge all details listed below are deemed correct. It is the buyers responsibility to confirm ALL details p...

Super clean machine currently under power and ready to go! Upgraded 10,000 rmp spindle Table: 18" x 48" Controller: Haas Tool Turret: 40 Spindle: Cat 40 X Axis Travel: 40" Y Axis Travel: 20" Z Ax...

GENERAL SPECIFICATIONS : spindle hours 15 242 X-Axis Travel: 120" Tool Magazine Capacity: 30 ATC Y-Axis Travel: 40" Control: Haas CNC Z-Axis Travel: 30" Chip Removal: Chip Auger Spindle Sp...

To the best of our knowledge all details listed below are deemed correct. It is the buyers responsibility to confirm ALL details prior to purchase.

Specifications: Max. Pitch Diameter: Ext.3" Int.2" Max. Face Width: 3/4 inch Approximate Dimensions: 3' x 3' x 5'H To the best of our knowledge all details listed below are deemed correct. It i...

Currently under power and needs to leave! Specifications Table Size: 4′ x 8′ X Axis Stroke: 104.3″ Y Axis Stroke: 50.0″ Z Axis Stroke: 3.9″ Max. Workpiece Size: 98.4″ x 49.2″ x .75″ Max. Load Capac...

Really nice, clean machine! under power and ready to go! 2007 Mori Seiki NH4000 with 15K spindle ( fresh rebuild ), 120 tool changer, and 2 tombstones. Some tooling included! Specs: X Axis Travel...

Machine works as expected. Currently under power. To the best of our knowledge all details listed below are deemed correct. It is the buyers responsibility to confirm ALL details prior to purchase.

WORK SPACE W x D x H - 24" x 36" x 24" KW - 5 VOLUME CU. FT. - 12 CFM - 400 MOTOR H. P. - 1/3 INSULATION THICKNESS - 6" To the best of our knowledge all details listed below are deemed correct. I...

Great machine! It is currently under power and ready to ship. The Machine works as expected. PUNCHING - 1 1/4 X 1/2 1 1/2 X 3/8 SHEARING - 9 X 3/4 14...

Great machine works great! To the best of our knowledge all details listed below are deemed correct. It is the buyers responsibility to confirm ALL details prior to purchase.

Magnetic Chuck Size (Manual): 6" x 18" Wheel Size: 8" x 0.75" x 1.25" Distance from Chuck Center to Spindle: 12.5" Spindle Motor: 1 HP To the best of our knowledge all details listed below are deem...

really clean machine! currently under power and ready to go! Comes with lots of tooling! To the best of our knowledge all details listed below are deemed correct. It is the buyers responsibility to...

This grinder is powered up and ready to go! MODEL ..................... NO. 2 MAGNETIC CHUCK SIZE ....... 6-1/2" X 18" MANUAL CHUCK .............. YES TABEL TRAVEL FEED ......... 19, 31 FPM TABLE ...

Specs: Table Size: 7" x 10" Maximum Wheel Diameter: 6" Max Direct Working Range: .4" x .4" x 2" Max Indirect Working Range: 6" x 2" x 2-3/8" Work Head Column Vertical Adjustment: 4" To the best of ...

To the best of our knowledge all details listed below are deemed correct. It is the buyers responsibility to confirm ALL details prior to purchase.

The machine is a ZT 2500Y Main and sub spindles, turret 1 has X, Y and Z with milling and turret 2 has X and Z with milling. All alignments are good. Parts catcher/work conveyor work fine. Has chip...

To the best of our knowledge all details listed below are deemed correct. It is the buyers responsibility to confirm ALL details prior to purchase. Financing Available