HAAS VF-4SS

MACHINE
Machine Height (max) ..................... 125-1/2" (3187.7 mm) Machine Width (max) ...................... 160-13/16" (4084.6 mm) Machine Depth (control fwd.).......... 132" (3352.8 mm)
Door Opening Width........................ 50-1/4" (1276.4 mm) Machine Weight............................... 13,300 lb (6033 kg)
Air Required ..................................... 4 scfm @ 100 psi (113 L/min @ 6.9 bar) .......................................................... Minimum 1/2" (12.7 mm) ID airline required
Power Required ............................... 28 kVA
Volts/Phase ...................................... 200–250 VAC, 3-phase, 50-60 Hz Full Steel Enclosure ......................... 14 GA cold-rolled steel
TABLE
Width ................................................ 18.625" (457 mm) Length............................................... 52" (1321 mm) Maximum Weight on Table............. 1750 lb (794 kg) T-slot Width...................................... 0.625" (15.875 mm) Center Distance................................ 3.15" (80 mm)
TRAVELS
Maximum X axis.............................. 50" (1270 mm)
Maximum Y axis .............................. 20" (508 mm)
Maximum Z axis .............................. 25" (635 mm)
Spindle nose to table....................... 4"– 29" (102 – 737 mm)
100% ball bar testing ensures three-dimensional squareness and accuracy.
ACCURACY (Single Axis)
Positioning ....................................... ±0.0002" (±0.0051 mm) Repeatability .................................... ±0.0001" (±0.0025 mm)
SPINDLE
Taper Size......................................... #40 Taper
Spindle Speed.................................. 0 to 12,000 rpm
Max Power Rating............................ 30 hp (22.4 kW)
Max Torque...................................... 90 ft-lb (122 Nm) @ 2000 rpm Spindle Bearings.............................. ABEC Class 7
Spindle Orientation.......................... Electronic
TOOL CHANGER
Fully Enclosed Tool Storage
Tool Capacity ................................... 30+1
Tool Type ......................................... CT40 or BT40
Maximum Tool Diameter ................ 3" (76 mm) with all pockets full
.......................................................... 6" (152 mm) with adjacent pockets empty Maximum Tool Weight.................... 12 lb (5.4 kg) with all pockets full
Tool Changer Type .......................... All electric, bidirectional
12
AVERAGE TOOL CHANGE TIMES
Tool-to-Tool...................................... 1.6 seconds Chip-to-Chip ..................................... 2.2 seconds
FEEDRATES
Rapids on X, Y, Z ............................. 1400 ipm (35.6 m/min) Maximum Cutting Rate.................... 833 ipm (21.2 m/min)
AXIS MOTORS
Max Thrust Rating X........................ 3085 lb (13,723 N) Max Thrust Rating Y ........................ 3085 lb (13,723 N) Max Thrust Rating Z ........................ 3923 lb (17,450 N)